CM Manufacturing builds custom, Kevlar reinforced modular stocks, with rail mount and folding stock adapter for
the M1A / M14 rifle.
CM Manufacturing
Combat xxX Multipliers
 



"For a people who are free, and who mean to remain so, a well-organized and armed militia is their best security."
-- Thomas Jefferson











EXAMPLES

Slideshow of how to assemble a custom M1A/M14 pistol grip folding stock.

Below are two examples of how you can finish your M.S.P. stock.
Assembled Model 8 M.S.P.
Model 8 side view of the 8" rail
Model 8 M.S.P finished example
Model 8 finished example M1A/M14 folding stock



Model 5 Finished Example Modular Stock

Model 8 Finished Example

The pictures to the left are just one example of how you can finish your M.S.P. Modular Stock Platform Model 8. The list below is what you would need to buy in order to finish your M.S.P. to look like the pictures on the left. The AR15 SAW pistol grip was bought from Tapco. Their web site is www.tapco.com.
The Push Button Folding Stock Mechanism or FSM-PB, the Car 15 stock block or PN and the AR15 collapsible stock were bought from ACE LTD. USA. Their web site is www.riflestocks.com.

  1. AR15 SAW pistol grip
  2. FSM-PB - Push Button Folding Stock Mechanism
  3. PN - Car 15 stock block
  4. AR15 collapsible stock


The AR15 SAW pistol grip bolts on just like it does on the AR15. The FSM-PB - Push Button Folding Stock Mechanism bolts to the receiver block at the back of the M.S.P Modular Stock Platform and the PN - Car 15 stock block bolts to the FSM-PB. The AR15 collapsible stock screws into the PN- Car 15 stock block. In the picture on the left, the FSM-PB and the PN are set at their lowest setting. The FSM-PB can be adjusted up a 1/2 inch and the PN can be adjusted up a 1/2 inch, making it possible to raise the collapsible stock one inch higher than the standard setting shown. This would raise your cheek rest position on the stock so that your eye would be more in line with a scope.  




Model 5 Finished Example

The pictures to the left are just one example of how you can finish your M.S.P. Modular Stock Platform Model 5. The list below is what you would need to buy in order to finish your M.S.P. to look like the pictures on the left. The folding stock mechanism and skeleton stock listed below were bought from ACE LTD. USA. Their web site is www.riflestocks.com. The AR15 SAW pistol grip was bought from Tapco. Their web site is www.tapco.com. The Harris bipod was bought from www.harrisbipods.com.

  1. AR15 SAW pistol grip
  2. FSM - Folding Stock Mechanism
  3. AKFX - Ace original skeleton stock
  4. Harris bipod

The AR15 SAW pistol grip bolts on just like it does on the AR15. The FSM - Folding Stock Mechanism bolts to the back of the M.S.P. Modular Stock Platform and the AKFX - skeleton stock bolts to the FSM - Folding Stock Mechanism. The FSM can be adjusted up a 1/2 inch from its lowest setting shown in the picture on the left. This would raise your cheek rest position on the stock so that your eye would be more in line with a scope. The Harris bipod clamps to the stud mounted in front of the rail.